AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Cst microwave studio antenna design10/31/2023 ![]() ![]() We have calculated all the required dimension for the microstrip patch antenna design. These can be determined using the following equations. The first step is determine the length and width of the patch antenna. The first step consists in simulation each bi-band antenna at 2.5 GHz and at 5.2 GHz for wireless applications using the simulators HFSS and CST Microwave studio. The RT/Duroid substrate has a dielectric constant of 2.33 and a thickness (or height) of 0.787mm. This work, presents the design and realization of two new miniaturized circular antennas as well as their effects on the human body. Suppose we want to design the patch antenna that resonates at 2.45GHz on a RT/Duroid 5870 substrate. ![]() Readers can skip to-Ģnd Part- Design of Microstrip Patch Antenna in CST Microwave Studioģrd Part- Inset Fed Patch Antenna Simulation and Result ![]() The first step which involves the calculation is described in this post. Through the electricity performance analysis of the reconfigurable antenna, precise manufacturing will be possible and provide guidance for manufacturing frequency reconfigurable antennas.Because it is a lengthy process, each step is described in different blog post. In this work, the changed pattern design by inflating is applied to the antenna design, and its frequency reconfigurability is achieved. Finally, the reconfigurable resonator array is presented, which is coupled to electric fields to absorb all incident radiation. The measured peak gains, the frequency, and the radiation direction are also reconfigurable by the initial size. The resonant frequency changes from GHz to kHz when the design of initial structure sizes is from millimeter to meter. In the process of transformation of the antenna, the resonant frequency of the antenna is changed because this frequency is determined by the conformational change. To solve the pattern changed problem, guided by geometric analyses and local buckle characteristics, the inflated triangular structure has been designed and verified by experiment and simulation. However, the prediction of their deployed shape remains a challenge. Inflatable structures are easy to manufacture by fusing 2 inextensible membranes together along a defined pattern of lines. The open path antenna is transformed from an open type to a closed structure by inflating. This paper proposes a frequency reconfigurable triangular antenna actuated by an inflated triangular structure. ![]()
0 Comments
Read More
Leave a Reply. |